- Provide 2 port 10/100Base-T(X) Ethernet ports

- Support X-Roaming < 100 ms

- Support AP/Client/Bridge/AP-Client Mode

- Support Multiple-SSID to 4 SSID

- Secured Management by HTTPs

- Wireless connecting status monitoring

- Event Warning by Syslog, Email, SNMP Trap

- 1KV isolation for PoE P.D. port of IAP-420+

- Rigid IP-30 housing design

- DIN-Rail and Wall-mount enabled

- IES-1050A provides 5 x 10/100Base-T(X) ports 

- IES-1080A provides 8 x 10/100Base-T(X) ports 

- Supports auto-negotiation and auto-MDI/MDI-X 

- Supports store-and-forward transmission 

- Supports flow control 

- Warning system by relay output 

- Rigid IP-30 housing design 

- DIN-Rail and wall mounting enabled

- Operating Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP and Modbus Gateway 

- Support Modbus Gateway: Modbus TCP, Modbus RTU and Modbus ASCII

- Support 1xRS-232/422/485 in DB9 connector

- Event Warning by Syslog, Email, SNMP trap

- Configurable by Web-based and Windows utility (DS-Tool)

- Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X

- Support Ethernet to fiber or Ethernet to SFP port

- Support LFP (Link Fault Pass-through) function

- Supports full/half duplex operationDIN-Rail and wall mounting enabled

- Supports store and forward transmission

- Provided DIP-Switch to setting function

- High reliability and rigid IP-30 housing

- DIN-Rail and panel mounting enabled

- Supports 4 ports 10/100Base-T(X) and 2 ports 100Base-FX SFP Port

- SNMP v1/v2c/v3 ,http server, telnet server support

- Web-based interface,telnet server and Windows utility (Open-Vision) configuration

- Event notification through Syslog, Email, SNMP trap, and relay

- Provides Web / Windows Utility / DIP-Switch function to set Ring

- Rigid IP-30 housing design

- DIN-Rail and wall mounting enabled

- Supports LLDP Protocol

- Supports 5 ports 10/100 Base-T(X)

- Supports auto-negotiation and auto-MDI/MDI-X

- Supports store-and-forward transmission

- Supports flow control

- Compact size for easily installation

- Rigid IP-30 housing design

- DIN-Rail and wall mounting enabled

- Provide 4x10/100/1000Base-T(X) and 2x100/1000Base-X SFP ports

- Supports Jumbo frame up to 9KBytes

- SFP port support 100Base-FX and 1000Base-X speed

- Support auto-negotiation and auto-MDI/MDI-X

- Support store and forward transmission

- Supports flow control

- Rigid IP-30 housing design

- DIN-Rail and wall mounting enabled

- Support X-Roaming < 100 ms

- Support AP/Client/Bridge/AP-Client Mode

- Secured Management by HTTPs

- Wireless connecting status monitoring

- Event Warning by Syslog, Email, SNMP Trap

- 1KV isolation for PoE P.D. port of IAP-420+

- Rigid IP-30 housing design

- DIN-Rail and Wall-mount enabled

- Support X-Roaming < 100 ms

- Support AP/Client/Bridge/AP-Client Mode

- Secured Management by HTTPs

- Wireless connecting status monitoring

- Event Warning by Syslog, Email, SNMP Trap

- 1KV isolation for PoE P.D. port of IAP-420+

- Rigid IP-30 housing design

- DIN-Rail and Wall-mount enabled