F1118P-16-150W

สถานะของสินค้า : สินค้าพร้อมส่ง

0 บาท
หรือ

รายละเอียดโดยย่อ

- 16 10/100 Mbps Base-TX RJ45 port; 1 10/100/1000 Mbps Base-T RJ45 port; 1 100/1000Base-X SFP port.

- Ports 1-16: IEEE 802.3af/at PoE ports; maximum power output of each PoE port: 30 W; maximum power output of the switch: 135 W.

- 13-inch desktop size, 1U height, rack mountable.

- Hardware DIP switch for selection among the CCTV, Standard, VLAN, and Extend modes. The Extend mode features 1-8 port transmission distance of up to 250m at 10 Mbps.Hardware DIP switch to isolate ports to prevent broadcast storm and defend against DHCP spoofing.

ข้อมูลเพิ่มเติม

Dimensions ไม่ใช่ Radio mode ไม่ใช่
WLAN Standard ไม่ใช่ Operating mode ไม่ใช่
Radio Frequency Band ไม่ใช่ Receive Sensitivity ไม่ใช่
Channel Size ไม่ใช่ Antenna Type ไม่ใช่
Gain ไม่ใช่ Wired Interface ไม่ใช่
Built in Surge Protection ไม่ใช่ Operation Mode ไม่ใช่
Wan ไม่ใช่ NAT ไม่ใช่
Static routing ไม่ใช่ DHCP ไม่ใช่
Port Forwarding ไม่ใช่ VLAN ไม่ใช่

 F1118P

Model F1118P
Standards&Protocols IEEE 802.3、IEEE 802.3u、IEEE 802.3ab、IEEE 802.3x、 IEEE 802.3af、
IEEE 802.3at
Switching capacity 7.2 Gbps
Throughput 5.36Mpps
Dimensions (W × D × H) 294*178*44mm
MTBF ≥100,000 hours(about 11 years)
Interfaces 16 10/100Mbps RJ45 Ports(Data/PoE)
1 10/100/1000Mbps RJ45 Ports(Data)
1 100/1000Mbps SFP Slot(Data) (Auto Negotiation/Auto MDI/MDIX)
Port lightning protection ≥6KV
Wire-speed forwarding Support
Forwarding mode Store-forward and cut-through
Mac Address Table 4K
PoE Supply Port 1 to Port 16 support standard IEEE802.3at/af
power( maximum power for each port is 30W),
PoE power type is end-span(12+, 36- and 45+, 78- line pair)
Input Voltage AC:100-240V~ 50/60Hz
Power consumption in full configuration:<135W
Power Supply:150W
Environment Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
CCTV、Standard, VLAN and Extend Operation Modes Offered CCTV: 1-8 ports support QoS,If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the G1 or SFP1 port of this switch to the upstream device to which the monitoring computer connects. This ensures smoother monitoring video playback.

Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.

VLAN: In this mode,1-16 portsof the switch cannot communicate with each other, but can communicate with the G1 and SFP1 ports.Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing 

Extend: In this mode, the data rate of 1-8 port of the switch is limited to 10 Mbps, whereas the maximum transmission distance of the port is increased to 250 meters. All the ports of the switch can communicate with each other.
Certification FCC、CE、RoHS

เป็นคนแรกที่รีวิวสินค้านี้

Tags สินค้า

ใช่ช่องว่างแบ่ง tag. ใช้ single quotes (') สำหรับคำพูด.